View ZL60006TDD_737740.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZL60006 1310 nm, 1550 nm 2.5 Gbps PIN with Preamplifier
Data Sheet
April 2004
Ordering Information ZL60006TED SC Housing ZL60006/TBD TO-46 with lens ZL60006/TDD ST Housing -40C to +85C
Features
* * * * * * Data rate up to 3.125 Gbps 1310 nm, 1550 nm PIN photodiode TO-46 Assembly Integrated TIA and limiting amplifier Single 3.3 V supply Low power consumption
Description
This optical receiver is a 3.3 V device which contains a PIN photodiode and a low noise transimpedance with limiting amplifier in a TO-46 package with lens cap. It is designed for OC-48 operation and single mode fiber. Reliability Assurance based on Telcordia GR-468CORE.
Applications
* * * * Sonet OC-48 SDH STM-16 2.125 Gbps fiber channel 2.5 to 3.125 Gbps general application
Figure 1 - Pin Diagram
Figure 2 - Functional Schematic
1
Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2003- 2004, Zarlink Semiconductor Inc. All Rights Reserved.
ZL60006
Optical and Electrical Characteristics
Parameter Responsivity, differential Output voltage amplitude, differential Bandwidth (3 dBel) Optical Saturation Level Noise-Equivalent Power Sensitivity (BER 10-9) Symbol R Min. 4 200 Typ. 6 300 2.0 1 -35 -25 -30 -23 Max. Unit kV/W mVpp GHz dBm dBm dBm
Data Sheet
Test Condition =1310 nm, RL=100 , Note 1 RL=100 Note 2 Pf = 10 W, RL=100 =1310 nm, ER = Note 3 =1310 nm, Note 4 =1310 nm,
ER =
VO
fc Psat NEP
S
Note 3 Dynamic Range Output Resistance (single) Power Dissipation Power Supply Current Ro PD IDD
PRBS Pattern 223 -1 at 2.5 Gbps.
Note Note Note Note 1: 2: 3: 4: Pf = 10 W Peak-Peak Power Pf = 500 W Peak-Peak Power Measured at 10 -10 BER with a 2 23 -1 PRBS at 2.5 Gbps Measured with STM-16 filter on electrical output, i.e., 1.875 GHz
24 50 85 25 140 38
dB mW m Data & Data AC Coupled
Operating Conditions:25C Case Temperature/3.3 V Supply Voltage/Fiber: Single-mode 10/125 m fiber.
Absolute Maximum Ratings
Parameter Supply Voltage Storage Temperature Symbol VCC Tstg Min. 0 -40 Max. 3.6 125 Unit V C
Recommended Operating Conditions
Parameter Supply Voltage Operating Temperature Signalling Rate, Note 5
Note 5:
Symbol VCC-VEE Top
Min. 3 -40
Typ. 3.3
Max. 3.6 85
Unit V C Gbps
fD 1 3.125 Data pattern are to have maximum runlength and DC-balance shifts no more than that of a PRBS-31 pattern.
2
Zarlink Semiconductor Inc.
ZL60006
Typical Responsivity
Wavelength Differential responsivity Differential responsivity 1310 nm 1550 nm
Data Sheet
Fiber core/cladding diameter numerical aperture 10/125 m, NA=0.11 6 kV/W 7.4 kV/W
Typical Responsivity vs Axial Displacement for a Singelmode Fiber
100 90
Relative Responsivity (%)
80 70 60 50 40 30 20 10 0 0 0.5 1 1.5 2 2.5 3 z-Axial Displacem ent of Fiber (m m ) at r_opt, relative TO46 lens
Figure 3 - Typical Responsivity vs Axial Displacement for a Singlemode Fiber
3
Zarlink Semiconductor Inc.
ZL60006
Data Sheet
Typical Responsivity vs Radial Displacem ent for a Singelm ode Fiber
1 00 90
Relative Responsivity (%)
80 70 60 50 40 30 20 1 0 0 0 5 1 0 1 5 20 25 30 35 40 r-Radial Displacement of Fiber (um) at Z=opt
Figure 4 - Typical Responsivity vs Radial Displacement for a Singlemode Fiber
Responsivity vs Wavelength
1 00 90
Relative Responsivity [ % ]_
80 70 60 50 40 30 20 1 0 0 800 900 1 000 1 00 1 1 200 1 300 1 400 1 500 1 600 1 700 1 800 1 900 Wavelngth [nm]
Figure 5 - Responsivity vs Wavelength of Coupled Input Power
4
Zarlink Semiconductor Inc.
ZL60006
Application Guidelines
ESD handling
Data Sheet
The receiver is sensitive to electrostatic discharges. When handling the device, precautions for ESD sensitive devices should be taken. These precautions include use of ESD protected work area with wrist straps, controlled work benches, floors etc. Power Supply Filter Power Supply decoupling capacitors are recommended for optimal performance of the receiver. A filter is recommended to minimize power supply noise, see Figure 6.
Host VCC
L 10 H C 0.1 F C 10nF
PIN / Preamp
Figure 6 - Recommended Power Supply Filter
Data Outputs
The outputs Data and Data, need to be AC-coupled. Typical value for the capacitors are 0.1 F.
5
Zarlink Semiconductor Inc.
BOTTOM VIEW ( 10 : 1 )
3,8
SIDE VIEW
13,460,76
2,54
n1,17 + 0,05 (3x) n0,45 + 0,04 (4x) -
0,6 0,03 * Brazed
0
R2,7 45
n1,02 max
n4,7
3, 6
1, 02
0,33 max Lens n1.50.05 R0,4 max
NOTES:1. All dimensions in mm. 2. General tol. ISO-2768-mK. 3. Coating: Case: Ni 1,5-2,5 m. Header: Ni min 0,5 m / Au min 1,5 m.
* 0,25 max glass overmould (3x)
(c) Zarlink Semiconductor 2002. All rights reserved.
Package code Previous package codes
Drawing type
ISSUE ACN DATE
1
JS0 04078R1A
TB
Package drawing, TO-46 with lens Title
22-MAR-03
APPRD. TD/BE
JS004078
For more information about all Zarlink products visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively "Zarlink") is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink's conditions of sale which are available on request.
Purchase of Zarlink's I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE

▲Up To Search▲

Price & Availability of ZL60006TDD

	To Download ZL60006TDD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .